How to make each link open in new tab Blogger

By opening each link in new tab certainly increases the website retention time 
which fools the search engine and thinks website is good thats why people sticking to it for such a long time.This certainly increases the search engine ranking
to do so 


simply follow the following steps
1> Login to Blogger.com
2> click Dashboard at upper right side
3> click on design just below the name of your blog
4> click Edit html just besides the page elements at top left hand side
5> Use keyboard shortcut ctrl+F to find <head> 
6> add a single line <base target='_blank' /> immediately after head tag so that it become

<head>
<base target='_blank' />

Wow all links opening in new tab do give your valuable comments

0 comments:

Post a Comment

Tips How to Crack Wi-Fi Password Easy

An internet connection has become a basic necessity in our modern lives. Wireless hot-spots (commonly known as Wi-Fi) can be found everywhere!

If you have a PC with a wireless network card, then you must have seen many networks around you. Sadly most of these networks are secured with a network security key.
Have you ever wanted to use one of these networks? You must have desperately wanted to check your mail when you shifted to your new house. The hardest time in your life is when your internet connection is down.
Cracking those Wi-Fi passwords is your answer to temporary internet access. This is a comprehensive guide which will teach even complete beginners how to crack WEP encrypted networks, easily.

Table of Contents

  1. How are Wireless networks secured?
  2. What you'll need
  3. Setting up CommView for Wi-Fi
  4. Selecting the target network and capturing packets
  5. Waiting...
  6. Now the interesting part... CRACKING!
  7. Are you a visual learner?

How Are Wireless Networks Secured?

In a secured wireless connection, internet data is sent in the form of encrypted packets. These packets are encrypted with network security keys. If you somehow manage to get hold of the key for a particular wireless network you virtually have access to the wireless internet connection
Broadly speaking there are two main types of encryptions used:
WEP (Wired Equivalent Privacy):
This is the most basic form of encryption. This has become an unsafe option as it is vulnerable and can be cracked with relative ease. Although this is the case many people still use this encryption.
WPA (Wi-Fi Protected Access):
This is the more secure alternative. Efficient cracking of the passphrase of such a network requires the use of a wordlist with the common passwords. In other words you use the old fashioned method of trial and error to gain access. Variations include WPA-2 which is the most secure encryption alternative till date. Although this can also be cracked using a wordlist if the password is common, this is virtually uncrackable with a strong password. That is, unless the WPA PIN is still enabled (as is the default on many routers).
Hacking WEP passwords is relatively fast, so we'll focus on how to crack them for this guide. If the only networks around you use WPA passwords, you'll want to follow this guide on how to crack WPA WiFi passwords instead.

What You'll Need...

  • A compatible wireless adapter:
This is by far the biggest requirement.The wireless card of your computer has to be compatible with the software CommVIew. This ensures that the wireless card can go into monitor mode which is essential for capturing packets.Click here to check if your wireless card is compatible
  • CommView for Wi-Fi :
This software will be used to capture the packets from the desired network adapter.Click here and download the software from the website.
  • Aircrack-ng GUI:
After capturing the packets this software does the actual cracking.Click here-Click here and download the software from the website.
  • A little patience is vital!!

Step 1: Setting Up CommView for Wi-Fi

  • Download the zip file of CommView for Wi-Fi from the website. Extract the file and run setup.exe to install CommView for Wi-Fi. When CommView opens for the first time it has a driver installation guide. Follow the prompts to install the driver for your wireless card.
  • Run CommView for Wi-Fi.
  • Click the play icon on the top left of the application window.
Start scanning for wireless networks.
CommView now starts scanning for wireless networks channel by channel. After a few minutes you will have a long list of wireless networks with their security type and signal. Now it is time to choose your target network

Step 2: Selecting the Target Network and Capturing Packets

A few things to keep in mind before choosing the target wireless network
  • This tutorial is only for WEP encrypted networks.
So make sure you select a network with WEP next to its name
  • Choose a network with the highest signal.
  • Each network will have its details in the right column.
  • Make sure the WEP network you are choosing has the least the least dB (decibel) value.
Once you have chosen your target network,select it and click Capture to start capturing packets from the desired channel.
Now you might notice that packets are being captured from all the networks in the particular channel. To capture packets only from the desired network follow the given steps.
  • Right click the desired network and click on copy MAC Address.
  • Switch to the Rules tab on the top.
  • On the left hand side choose MAC Addresses
  • Enable MAC Address rules
  • For 'Action' select 'capture' and for 'Add record' select 'both'.
  • Now paste the mac address copied earlier in the box below.
We need to capture only data packets for cracking. Hence select D on the bar at the top of the window and deselect M (Management packets) and C (Control packets).
Now you have to save the packets so that they can be cracked later. To do this-
  • Go to the logging tab on top and enable auto saving.
  • Set Maximum Directory Size to 2000
  • Set Average Log File Size to 20.

Step 3: Waiting...

Now the boring part- WAITING!
NOTE: The amount of time taken to capture enough data packets depends on the signal and the networks usage. The minimum number of packets you should capture should be 100,000 for a decent signal.
After you think you have enough packets (at least 100,000 packets)
  • Go to the log tab and click on concatenate logs.
  • Select all the logs that have been saved.
  • Do not close CommView for Wi-Fi
  • Now navigate to the folder where the concatenated logs have been saved
  • Open the log file
  • Select File- Export -Wire shark tcpdump format and choose any suitable destination.
  • This will save the logs with a .cap extension to that location

Now the Interesting Part... CRACKING!

  • Download Aircrack-ng and extract the zip file.
  • Open the folder and navigate to 'bin'.
  • Run Aircrack-ng GUI
  • Choose WEP
  • Open your .cap file that you had saved earlier.
  • Click Launch.
  • In the command prompt type in the index number of your target wireless network.
  • Wait for a while .If everything goes fine the wireless key will be shown.
You may also receive a request to try with more packets. In this case wait until more packets have been captured and repeat the steps to be performed after capturing packets
BEST OF LUCK

0 comments:

Post a Comment

Best 10 Tips for Healthy Hair/ Hair Care/ Hair treatment


01# Tip For Hair Care


Apple Cidar Vinegar
For bouncy hair, apply a one to one mixture of warm water and apple cider vinegar to your hair. Rinse it thoroughly after 5 minutes to get rid of the apple cider smell.

02# Tip For Hair Care


Baking Soda Therapy

Make a mixture of 3 tbsp. of baking soda and some water. Rinse your hair with this solution after shampooing. Let it set in for at least 5 minutes before the final rinse. This therapy will help to remove the excess shampoo and styling product from your hair.

03# Tip For Hair Care


Bottle Gourd Treatment

Extract some bottle gourd juice and apply it into your hair. Keep this solution for half an hour and wash it off thoroughly.

04# Tip For Hair Care


Olive Oil Treatment


Olive Oil is great for conditioning and shine. Honey can also be combined with Olive Oil on hair to make the results that much more effective. All you need is a small cup of olive oil. Use your hands to rub it in the ends and the mid length of your hair, shampoo after two hours.

05# Tip For Hair Care


Amla


Hair fall remedy for normal hair - Take half a cup of 'amla' powder, add to it two tablespoons of castor oil and one full egg and make into a smooth mixture. Apply on the hair and the scalp, leave on for about 30 minutes before shampooing.

06# Tip For Hair Care


Avoid Hot Water

Skip hot water showers, because hot water will make your hair dry and brittle as it strips protective oils from your hair. Thus, prefer a temperature which is just a bit warmer than your body temperature.



07# Tip For Hair Care


Egg Treatment

Use the entire egg to condition your hair. If you have dry or brittle hair, use egg whites to moisturize your hair. Use ½ cup of any egg mixture (egg white, entire egg) and apply to clean, damp hair. Leave it for 20 minutes and rinse with cool water.

08# Tip For Hair Care


Hair Fall Remedy

Prepare a mixture of 1 cup of your daily conditioner and 2-3 tablespoons of honey. Apply this mixture evenly on your wet hair. Leave it for 30 minutes and wash it off thoroughly. This mixture will close down your hair’s cuticle and give your hair that amazing shine.

09# Tip For Hair Care


Good Diet

Drink lots of water and eat a healthy diet of raw fruits and vegetables. The most effective home treatment for hair care is a healthy diet. You are what you eat, and what you put into your body will be reflected on the outside.

10# Tip For Hair Care


Hair fall remedy Oily Hair

Make a mixture out of one cup of henna powder to which one tablespoon of lime juice has been added and mix into it the white of an egg. If the egg smell puts you off, use curd instead of the white of an egg. Apply this mixture to the hair, leave on for approximately half an hour and then shampoo. A point to note is that this pack will not colour your hair despite the dying quality of henna being an ingredient.










0 comments:

Post a Comment

Tips to book an IRCTC Tatkal ticket faster

In India, trains are one of the easiest and cheapest modes of transport. Over the years, booking train tickets has become convenient using the IRCTC (Indian Railway Catering & Tourism Corporation) website. In fact, according to the comScore and ASSOCHAM India report, IRCTC is the leading travel e-commerce site in the country with the highest transaction share in the travel category. One out of five online users in India visits the Indian Railways site, with almost 12 million unique visitors monthly and majority of the traffic is seen between 10 am to 12 pm. It is during this time that IRCTC allows booking Tatkal tickets, which means tickets that are reserved for people with last minute travel plans, travel emergencies and so on. IRCTC receives a lot of flak for its slow, sluggish performance and had become a laughing stock when the site crashed (server inability, low bandwidth) during the festivities last year, just minutes after Tatkal bookings began. Currently, it is said to sell about 40-45,000 Tatkal railway tickets between 10 am and 11 am (its 10 and 11, because all tickets are sold in one hour – in fact, 45 mins), which it plans to spruce up to 60-65,000 with the help of its new Rs. 10 crore drive for better, upgraded servers to 64GB RAM. This will allow 80 lakh concurrent connections compared to the current 10 lakh. The Tatkal online booking window opens a day in advance before the date of your journey just for an hour and tens of thousands of people try to log into the Tatkal booking system, which makes it as tough as getting into an overcrowded Mumbai local train during the peak office hours.

If you’ve ever tried booking a Tatkal ticket, you will know how important each minute is and how annoying IRCTC’s online passenger reservation system can get. You have to make optimum use of each second as soon as the online booking counter opens, and those 5 to 10 minutes before the counter opens are also very crucial. We’ve laid out a guide to help you book a Tatkal ticket, along with a set of handy tech tools and tips and tricks that will help you bag a confirmed Tatkal ticket faster.

First, the Tatkal or last minute online booking window opens only a day in advance of your journey between 10 am and 12 am. A person can book only two Tatkal tickets on one user id, so for any more tickets you will need to login using other IRCTC user ids. Now, you need to successfully log into the IRCTC reservation system at exactly 10 a.m., but remember, there are tens of thousands of other people trying to log into the site, so one needs to be really quick. Try to login using multiple accounts on different browsers such as Mozilla, Chrome, Opera or take a hand from your pals 10 minutes before. For this, ensure that your time is synced with the IRCTC server time, so that there are no issues due to difference in time as a delay in a minute means lesser chances of getting a ticket.

To know the IRCTC server time, click here, key in any number, click on “Get Schedule” and the lower right side will show you the exact broswer time at IRCTC, or you can even log into your IRCTC account. Besides, you can also use the Firefox add-on tool to sync the time with your computer. By installing the add-on, the userscript will provide the realtime view of what the server time is once you log into your IRCTC account. This add-on is also available for Chrome.

Once you log in with the IRCTC account, the key is to keep the session active. Those who have tried booking a Tatkal ticket may have often faced the error which says “Session expired”, which means you have to start logging in again, and this delay can cost you your ticket. To keep the session alive, ensure that the screen doesn't go idle for more than 3 minutes, because as soon as it does, the session will expire. So do not spend time thinking which ticket to choose or go hunting for your debit/credit card details at the last minute; keep everything handy so that the screen doesn't go idle.

As the only way to avoid the session from expiring is keeping the page active, here are two handy tricks. You can use this link. All you need to do is make a note of the Session ID and the Engine ID (from the address bar), replace it with your session and engine IDs and use the URL in another browser (For instance, if you are using Chrome, then use it in Firefox) and keep doing it till you complete your booking process. If you think this is a complicated method, then the other trick to keep your session active is by going to the IRCTC website > Login > General > Terms & Conditions. All you need to do is copy the “Terms and Conditions” URL in another browser and keep pinging it every 2-3 minutes.

As soon as you successfully log into IRCTC, choose the starting point and destination, then a list of trains will appear and you can choose the train and the ticket type – Sleeper, 3-tier AC, 2-tier AC and so on. You will then have to key in all the necessary details including an identity proof. One has to be really quick in filling these details and don't forget to keep your identity proof  handy. For instance, if you plan to choose the PAN card, then make a note of the PAN number. As you have to be very quick and can't keep typing in details for minutes, here’s what you can do – keep all the information like name of the passengers, age, PAN number handy in a notepad and just copy paste the information while booking the ticket.


magic Autofill tool

Another alternative is an extremely handy tech tool called Autofill that can be used on Firefox as well as Chrome. Using the autofill add-on or extension, you need to visit IRCTC, say, about half an hour or so before the Tatkal bookings begin. Just go to the usual ticket booking page and fill in your details. Simply follow the booking procedure till you reach the payment gateway and then go no further. The add-ons will ensure that the browser remembers these details and you will not have to spend a lot of time typing them while booking the Tatkal ticket. Another tool you can use is the Magic Autofill. To use this tool, fill in all your details and click on “I’m feeling lucky”, a  "Magic Autofill" blue button will appear and you have to drag it into your bookmarks. While booking the Tatkal ticket, once you are done finalising the train and berth, click on the Magic autofill and it will do the rest and you can quickly proceed to payment.

The IRCTC website is jam packed and quite slow during Tatkal booking, so ensure that you are patient and do not double click on anything or hit the backspace button as this will log you off and you will need to start the complete procedure again. You will even come across a message that reads “Service Unavailable”; in this case, just keep refreshing the page. Once you are done with the payment, wait until it takes you back to the IRCTC page (unless the transaction fails).

These tech tools and simple tips and tricks will definitely increase the chances of bagging a confirmed ticket. Do share with us your experience of booking a Tatkal ticket.

1 comments:

Post a Comment

AIRTEL and DOCOMO HIGH SPEED VPN

I am sharing you a latest VPN servise 
Is Tsunami !!!VPN

Tools which we are going to need
1.Tsunami VPN Client

 Click here to Download Tsunami VPN Client
Features:
High Speed 
Free With AIRTEL and DOCOMO

Airtel user use airtelgprs.co    

tata docomo users use apn : tata.docomo.internet   

rocedure :

1.Register an Account on Tsunami VPN Click on Next Line For Link

Click here for Tsunami VPN Registration 


2.Now Install the downloaded Tsunami VPN Client

3.Now Go to Directory
C:\Program Files\TsunamiVPN\data\config\

C:\ Stands for Drive on which windows is installed

Now there you will find Many .ovpn files

Edit all of them using text editor and change the content as follows

Cange

"proto tcp" to "proto udp"

edit remote "server 80" to "server 53"
e.g edit 
remote 109.123.119.208 80 to remote 109.123.119.208 53

4.Save it for all .ovpn files

5.Now On Your desktop you will find three icons related to tsunami VPN

6.First run Tsunami VPN

A cmd window will open
then enter your Tsunami VPN username and password

7.Now either Run Tsunami VPN Vista_7 or Tsunami VPN_Windows xp found on your desktop
according to your OS and Connect and enjoy your free tunnel

1 comments:

Post a Comment

BSNL 3G GPRS Using 2G Pack April 2013 Tips

After many research i have get this BSNL 3G Tips. Please Keep it secret, otherwise it will be blocked soon. I have tested with 3 SIM in KOLKATA circle. But I think this trick will work all over India.
  So here is the tricks:-
BSNL 3G GPRS TIPS USING 2G PACK


  • First recharge with any 2G packs, you will get 2G speed.
  • Use it on that day with 2G speed.
  • Next day recharge with Rs.25.00 3G pack (100 mb for 3 days).
  • You will get 3G speed for the period of your 2G recharge pack.(not 3 days)
  • If you don't get 3G speed, wait for 8Hours, you will surely get 3G speed.
  • Please leave your comments after using the trick.

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...
Related Posts Plugin for WordPress, Blogger...

Share

Floating Social Media Buttons for Blogger by Beautiful Blogger Widgets

Share
Get This
Hindi Shayari